Generator Stator for Ski-Doo MX Z 600 XRS Carb 2009-2017 / Lynx Rave RS 600 2010-2014
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2017 Ski-doo MX Z X-RS 600
- 2016 Ski-doo MX Z X-RS 600
- 2015 Ski-doo MX Z X-RS 600
- 2014 Ski-doo MX Z X-RS 600
- 2014 Lynx Rave RS 600
- 2013 Ski-doo MX Z X-RS 600
- 2013 Lynx Rave RS 600
- 2012 Ski-doo MX Z X-RS 600
- 2012 Lynx Rave RS 600
- 2011 Ski-doo MX Z X-RS 600
- 2011 Lynx Rave RS 600
- 2010 Ski-doo MX Z X-RS 600
- 2010 Lynx Rave RS 600
- 2009 Ski-doo MX Z X-RS 600
- 2009 Ski-doo MX Z 600 RS Carb L/C
Interior diameter: 40mm
Exterior diameter: 103mm
Length of wires stator to connectors: 300mm, 395mm
Length of pickup coil's wire to stator: 120mm
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Wire to wire resistance:
Alternator: = 0.4ohms +/-20%
Pickup: = 680 ohms =+/-20%
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.
Brand new generator stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.