Generator Stator for Arctic Cat Wildcat / Wildcat 4 / Wildcat X / Wildcat 4X 1000 2012-2016

CAD$ 284.00
Availability: In stock
SKU
RM01229

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

0802-072
0802-064

Dimenssions

Interior Diameter : 54 mm
Exterior Diameter : 126 mm
Thickness : 20 mm
Number of wires : 5
Number of plugs : 2

Alternator : Yellow to Yellow = 0.4 ohms +/- 20 %
Pickup Coil : Blue to White = 200 ohms +/- 20 %

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Brand new silicon stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pickup coil included
  • Connector included
  • All product shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Generator Stator for Arctic Cat Wildcat / Wildcat 4 / Wildcat X / Wildcat 4X 1000 2012-2016
Your Rating
Customers Also Viewed
Currently there is no product to display.