Generator Stator for Kawasaki Teryx KRF 800 / Teryx 4 KRT 800 2014-2020
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2020 Kawasaki KRT 800 Teryx 4
- 2020 Kawasaki KRF 800 Teryx
- 2019 Kawasaki KRT 800 Teryx 4
- 2019 Kawasaki KRF 800 Teryx
- 2018 Kawasaki KRT 800 Teryx 4
- 2018 Kawasaki KRF 800 Teryx
- 2017 Kawasaki KRT 800 Teryx 4
- 2017 Kawasaki KRF 800 Teryx
- 2016 Kawasaki KRT 800 Teryx 4
- 2016 Kawasaki KRF 800 Teryx
- 2015 Kawasaki KRT 800 Teryx 4
- 2015 Kawasaki KRF 800 Teryx
- 2014 Kawasaki KRT 800 Teryx 4
- 2014 Kawasaki KRF 800 Teryx
Interior diameter : 42 mm
Exterior diameter : 105 mm
Thickness : 20 mm
Length of wires stator to grommet : 160 mm
Length of wires grommet to plug : 950 mm
Length of pickup coil's wire to grommet : 90 mm
Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5
Wire to wire resistance :
Alternator : White between each White = 0.6 ohms +-20%
Pickup : Green to Blue = 500 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Generator stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.