Generator Stator for Kawasaki VN 700 1985 & VN 750 Vulcan 1986-2006 VN750 VN700

CAD$ 164.00
Availability: In stock
SKU
RMS010-104835

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !

21003-1118

Dimensions :
Interior diameter : 38 mm
Exterior diameter : 102 mm
Thickness : 19.5 mm
Length of wires stator to grommet : 80 mm
Length of wires grommet to plug : 500 mm

Other specifications :
Number of wires : 3
Number of plugs : 3
Number of pins : 3
Number of poles : 18

Wire to wire resistance :
Alternator : = 0.4 ohms +-20%
Alternator to ground = O.L

Before installing your new stator

  • Check the AC output of the stator
  • Replace any burned or corroded connectors on stator and regulatorrectifier
  • Check and repair any melted wiring
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Brand new aftermarket stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Rubber grommet included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Generator Stator for Kawasaki VN 700 1985 & VN 750 Vulcan 1986-2006 VN750 VN700
Your Rating
Customers Also Viewed
Currently there is no product to display.