Generator Stator for Kawasaki VN 700 1985 & VN 750 Vulcan 1986-2006 VN750 VN700
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2006 Kawasaki VN 750 Vulcan
- 2005 Kawasaki VN 750 Vulcan
- 2004 Kawasaki VN 750 Vulcan
- 2003 Kawasaki VN 750 Vulcan
- 2002 Kawasaki VN 750 Vulcan
- 2001 Kawasaki VN 750 Vulcan
- 2000 Kawasaki VN 750 Vulcan
- 1999 Kawasaki VN 750 Vulcan
- 1998 Kawasaki VN 750 Vulcan
- 1997 Kawasaki VN 750 Vulcan
- 1996 Kawasaki VN 750 Vulcan
- 1995 Kawasaki VN 750 Vulcan
- 1994 Kawasaki VN 750 Vulcan
- 1993 Kawasaki VN 750 Vulcan
- 1992 Kawasaki VN 750 Vulcan
- 1991 Kawasaki VN 750 Vulcan
- 1990 Kawasaki VN 750 Vulcan
- 1989 Kawasaki VN 750 Vulcan
- 1988 Kawasaki VN 750 Vulcan
- 1987 Kawasaki VN 750 Vulcan
- 1986 Kawasaki VN 750 Vulcan
- 1985 Kawasaki VN 700 Vulcan
Dimensions :
Interior diameter : 38 mm
Exterior diameter : 102 mm
Thickness : 19.5 mm
Length of wires stator to grommet : 80 mm
Length of wires grommet to plug : 500 mm
Other specifications :
Number of wires : 3
Number of plugs : 3
Number of pins : 3
Number of poles : 18
Wire to wire resistance :
Alternator : = 0.4 ohms +-20%
Alternator to ground = O.L
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulatorrectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.