Kit Flywheel Rotor + Flywheel Puller MP37 for Ski-Doo Grand Touring GSX GTX MX Z MX ZX Summit 500 600 700 800 2002-2008
Please note:
- This flywheel fits the RER / Trail models ONLY.
- The STD and RER / Trail models of the Ski-Doo 500/600/700/800cc do not use the same stator and flywheel.
- For the STD models, please use flywheel RM11511 or flywheel & puller kit RMS900-103563.
- You can determine the correct flywheel by measuring the length of the lump (timing trigger ridge) on outside edge of the flywheel.
- This RER / Trail version has a 60 mm / 2.4'' long lump.
- The STD version (RM11511) has a 25 mm / 1" long lump.
- All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
- 2008 Ski-doo GTX 500 SS Sport Carb L/C
- 2007 Ski-doo MX ZX 800 HO Renegade X Carb L/C
- 2007 Ski-doo MX Z 800 HO Renegade PTEK Carb L/C
- 2007 Ski-doo MX Z 800 HO Blizzard PTEK Carb L/C
- 2007 Ski-doo MX Z 800 HO Adrenaline PTEK Carb L/C
- 2007 Ski-doo MX Z 600 HO Adrenaline Carb L/C
- 2007 Ski-doo MX Z 500 SS Trail Carb L/C
- 2007 Ski-doo MX Z 500 SS Adrenaline Carb L/C
- 2007 Ski-doo GTX 800 HO LTD PTEK Carb L/C
- 2007 Ski-doo GTX 500 SS Sport Carb L/C
- 2007 Ski-doo GSX 800 HO PTEK Carb L/C
- 2007 Ski-doo GSX 500 SS Sport Carb L/C
- 2006 Ski-doo MX ZX 800 HO Renegade X Carb L/C
- 2006 Ski-doo MX Z 800 Renegade Carb L/C
- 2006 Ski-doo MX Z 800 Adrenaline Carb L/C
- 2006 Ski-doo MX Z 600 HO Adrenaline Carb L/C
- 2006 Ski-doo MX Z 500 Trail Carb L/C
- 2006 Ski-doo GTX 800 HO LTD PTEK Carb L/C
- 2006 Ski-doo GTX 500 Sport Carb L/C
- 2006 Ski-doo GSX 800 HO PTEK Carb L/C
- 2006 Ski-doo GSX 500 Sport Carb L/C
- 2005 Ski-doo Summit 800 HO Adrenaline Carb L/C
- 2005 Ski-doo Summit 600 HO Carb L/C
- 2005 Ski-doo MX ZX 800 HO Renegade X Carb L/C
- 2005 Ski-doo MX ZX 800 HO Carb L/C
- 2005 Ski-doo MX ZX 600 HO Carb L/C
- 2005 Ski-doo MX Z 800 HO Renegade PTEK Carb L/C
- 2005 Ski-doo MX Z 800 HO Adrenaline PTEK Carb L/C
- 2005 Ski-doo MX Z 600 HO Trail RER Carb L/C
- 2005 Ski-doo MX Z 600 HO Renegade RER Carb L/C
- 2005 Ski-doo MX Z 600 HO Adrenaline Carb L/C
- 2005 Ski-doo MX Z 500 SS Trail Carb L/C
- 2005 Ski-doo MX Z 500 SS Adrenaline Carb L/C
- 2005 Ski-doo GTX 800 HO Carb L/C
- 2005 Ski-doo GTX 600 HO Carb L/C
- 2005 Ski-doo GTX 500 SS Carb L/C
- 2005 Ski-doo GSX 800 HO PTEK Carb L/C
- 2005 Ski-doo GSX 600 HO Carb L/C
- 2005 Ski-doo GSX 500 SS Carb L/C
- 2004 Ski-doo Summit 800 HO RER Carb L/C
- 2004 Ski-doo Summit 600 HO Carb L/C
- 2004 Ski-doo MX ZX 800 HO Carb L/C
- 2004 Ski-doo MX ZX 600 HO RER Carb L/C
- 2004 Ski-doo MX Z 800 HO Renegade X PTEK Carb L/C
- 2004 Ski-doo MX Z 800 HO Renegade PTEK Carb L/C
- 2004 Ski-doo MX Z 800 HO Adrenaline PTEK Carb L/C
- 2004 Ski-doo MX Z 600 HO Trail RER Carb L/C
- 2004 Ski-doo MX Z 600 HO Renegade RER Carb L/C
- 2004 Ski-doo MX Z 600 HO Adrenaline RER Carb L/C
- 2004 Ski-doo MX Z 500 SS Trail RER Carb L/C
- 2004 Ski-doo MX Z 500 SS Trail R Carb L/C
- 2004 Ski-doo MX Z 500 SS Renegade Carb L/C
- 2004 Ski-doo MX Z 500 SS Adrenaline Carb L/C
- 2004 Ski-doo Legend 700 Carb L/C
- 2004 Ski-doo Legend 500 SS Carb L/C
- 2004 Ski-doo GSX 800 HO PTEK Carb L/C
- 2004 Ski-doo GSX 600 HO Carb L/C
- 2004 Ski-doo GSX 500 SS Carb L/C
- 2003 Ski-doo Summit 800 HO X RER Carb L/C
- 2003 Ski-doo Summit 800 HO Highmark X RER Carb L/C
- 2003 Ski-doo Summit 800 HO Highmark RER Carb L/C
- 2003 Ski-doo Summit 800 HO Adrenaline RER Carb L/C
- 2003 Ski-doo Summit 700 X RER Carb L/C
- 2003 Ski-doo Summit 700 RER Carb L/C
- 2003 Ski-doo Summit 700 Highmark RER Carb L/C
- 2003 Ski-doo Summit 700 Adrenaline RER Carb L/C
- 2003 Ski-doo Summit 600 HO Adrenaline RER Carb L/C
- 2003 Ski-doo MX ZX 800 RER Carb L/C
- 2003 Ski-doo MX ZX 600 HO RER Carb L/C
- 2003 Ski-doo MX Z 800 Sport RER Carb L/C
- 2003 Ski-doo MX Z 800 Renegade RER Carb L/C
- 2003 Ski-doo MX Z 800 Adrenaline RER Carb L/C
- 2003 Ski-doo MX Z 700 Adrenaline RER Carb L/C
- 2003 Ski-doo MX Z 600 Trail RER Carb L/C
- 2003 Ski-doo MX Z 600 RER Carb L/C
- 2003 Ski-doo MX Z 600 HO Trail RER Carb L/C
- 2003 Ski-doo MX Z 600 HO Sport RER Carb L/C
- 2003 Ski-doo MX Z 600 HO Renegade RER Carb L/C
- 2003 Ski-doo MX Z 600 HO Adrenaline RER Carb L/C
- 2003 Ski-doo MX Z 500 Trail RER Carb L/C
- 2003 Ski-doo MX Z 500 Adrenaline RER Carb L/C
- 2003 Ski-doo Legend 700 sport Carb L/C
- 2003 Ski-doo Legend 700 Carb L/C
- 2003 Ski-doo Legend 600 Sport Carb L/C
- 2003 Ski-doo Legend 600 Carb L/C
- 2003 Ski-doo Legend 500 Sport Carb L/C
- 2003 Ski-doo Grand Touring Sport 700 Carb L/C
- 2003 Ski-doo Grand Touring Sport 500 Carb L/C
- 2003 Ski-doo Grand Touring 700 Carb L/C
- 2003 Ski-doo Grand Touring 600 Carb L/C
- 2002 Ski-doo MX Z 800 R Sport Carb L/C
410922966
Dimensions:
Exterior Diameter: 129 mm
Interior Diameter: 105 mm
Interior Diameter Center Housing: 27 mm
Exterior Diameter Center Housing: 24 mm
Thickness (exterior): 52 mm
Thickness (interior): 38 mm
Long Lump (timing trigger ridge): 60 mm
Flywheel Puller
12 Holes Disc, 6 mm & 8 mm Bolts
Before attempting to start your Ski Doo, adjusting the air gap is necessary. Rotate the flywheel so the raised node is lined up with the pick up/pulsar coil and adjust as close as possible but no less than 0.010’’.
Flywheel Puller
Removing a Powersport Vehicle's Flywheel / Rotor:
How it Works
Flywheel Pullers are very versatile engine service tools and are a must in every toolbox. Our large selection of best selling rotor and flywheel pullers fit just about any motorcycle or ATV. Flywheel pullers are very simple to use, having only an outer body to hold the flywheel and a screw to push on the crankshaft. Some are even simpler, having only a bolt to thread into the flywheel. A taper holds the flywheel or rotor and the crankshaft together. The flywheel is secured to the shaft by applying torque to the fixing bolt.
An Important Component to use
Many flywheel or rotor puller tools will include a small cap. This is a crankshaft thread protector, and should always be used if it is included with the puller. You slip this cap onto the end of the inner piece of the puller which presses against the tip of the crankshaft. This keeps the fine threads from being stripped or damaged while removing the flywheel or rotor.
Actions to Avoid
Most of the time, removing a flywheel or rotor is painless. But sometimes corrosion, over-torquing the fixing bolt, or heat-cycling can give you a hard time removing the flywheel. We too often see mechanics use a larger breaker bar or air impact tools to ease the flywheel off. These two techniques will damage the flywheel, the flywheel puller, or the crank. Avoid using them if you want to keep it cheap.
Tips to break a stuck flywheel loose:
Torque Wrench
How do you know if it's stuck? You simply have to set your torque wrench to 50 ft-lbs and try to ease the flywheel off. If the flywheel is not stuck, you should be able to remove it with even less torque than this. If it is stuck, don't use more torque or you might break your wrench.
Ball Peen Hammer
If 50 ft-lbs does not do the trick, go fetch something like a 12 or 16 oz ball peen hammer. Hit the end of the flywheel puller with a medium blow. Many times, the shock you create will successfully remove your flywheel. Be prepared to catch the flywheel since the shock of the hammer can make the flywheel jump off. Once again, getting into that situation will be pricey. And don't forget your safety glasses.
Propane Torch
The hammer is not a be-all, end-all solution. Sometimes, you will have to find something more powerful, and that's where the propane torch comes in. As a last resort solution, the heat should expand the flywheel but not the crank, since it is too massive to expand as fast. That way, the flywheel will become looser and will come off easier.
Important Security Tips: In order to not set fire to your garage, your vehicle, or yourself, certain precautions are necessary prior to heating the flywheel:
- Clean any oil or flammable liquids off the flywheel;
- Make sure your work area is free of any flammable liquids and that you work in a well ventilated area;
- Make sure to remove the gas tank, and set it aside at a safe distance.
Make sure the flame of your torch is focused, and heat only the center of the flywheel. This is due to the fact that some flywheels use adhesive or other fixing compounds to locate the magnets in the rim that can be damaged by concentrated heat. Here again, the wheel might fall off the crank, so be prepared to catch it. And remember that you just heated it, so make sure you can catch it without burning yourself.
With these tips and techniques, you are now equipped to handle any stuck flywheel without throwing your flywheel puller at it; unless you have a habit of working with machines that have been in a lake for months!
Get this brand new magneto flywheel rotor & MP37 flywheel puller bundle
Our flywheel is manufactured to OEM specs and is covered by a warranty that brings you peace of mind.
Features :
- Heavy duty flywheel rotor with stainless steel capping & high strength epoxy that completely prevents magnet failure
- 12-hole universal flywheel puller disc with 6mm & 8mm bolts for easy and professional rotor removal
- Crankshaft protector cap included to prevent any damage to vulnerable crankshaft threads
- All parts are tested through an extensive quality control process to ensure correct operation