Kit Stator + Voltage Regulator Rectifier for Kawasaki Ninja ZX-6R 2007 2008

CAD$ 373.00
Availability: In stock
SKU
RMS900-100117
RMS900-100117-R00
Stator

Dimensions :
Interior diameter : 43.4mm
Exterior diameter : 105mm
Thickness : 16.5mm
Length of wires stator to grommet : 100mm
Length of wires grommet to plug : 500mm

Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3

Wire to wire resistance :
Alternator : White to White = 0.4ohms +/-20%

Voltage Regulator Rectifier

Dimensions :
Width : 80mm
Length : 94mm
Height: 30mm
Wires length : 300mm 187mm
Fixation holes center to center : 73mm

Other specifications :
Number of plugs : 2
Number of pins : 6
Number of wires: 6
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰

Stator + Voltage Regulator Rectifier

Before installing your new stator and voltage regulator rectifier

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

YOU SAVE 15% off the items price combined, when buying a kit.

Brand New Kit Stator + Voltage Regulator Rectifier

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Connector included
  • All products shipped are tested

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Stator
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Rubber grommet included

20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.

We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.

Voltage Regulator Rectifier
  • The Quality exceeds the OEM equipment
  • Improved heat sink and charging capabilities
  • Higher grade of electric components.
Write Your Own Review
You're reviewing:Kit Stator + Voltage Regulator Rectifier for Kawasaki Ninja ZX-6R 2007 2008
Your Rating
Customers Also Viewed
Currently there is no product to display.