Mosfet Voltage Regulator Rectifier for Triumph Daytona 675 R 2006-2012
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2017 Triumph Daytona 675
- 2016 Triumph Daytona 675
- 2015 Triumph Daytona 675
- 2014 Triumph Daytona 675
- 2013 Triumph Daytona 675
- 2012 Triumph Daytona 675 R
- 2012 Triumph Daytona 675
- 2011 Triumph Daytona 675 R
- 2011 Triumph Daytona 675
- 2010 Triumph Daytona 675
- 2009 Triumph Daytona 675
- 2008 Triumph Daytona 675
- 2007 Triumph Daytona 675
- 2006 Triumph Daytona 675
Width : 30 mm
Length : 94 mm
Height : 82 mm
Fixation holes center to center : 75 mm
Wires Length: 171 mm & 200 mm
Other specifications :
Number of plugs : 2
Number of pins : 7
Number of wires: 7
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
This product is an advanced design that lowers operating temperatures for extended longevity and better performance than the OEM part.
Brand new Mosfet Voltage Regulator RectifierSTOP BURNING YOUR REGULATOR RECTIFIER !
It is time to update or replace your voltage regulator with the advanced MOSFET type.
It runs cooler than all OEM diode style regulators. In addition, this rectifier has overheat protection, rather than burn up it will simply turn off for a while and cool off.
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- The quality exceeds the OEM equipment
- Improved heat sink and charging capabilities
- Higher grade of electric components
- All shipped products are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
*All item pictures are accurate, if in doubt, do not hesitate and compare our item to your original part.
Why use Mosfet Enhanced technology?
Runs much cooler than the traditional Shunt voltage regulator rectifier.
Less load on the stator, less work, less fuel is used and you save.
The power charging your battery is steadier and smooth.
Extended battery life
Extends the battery’s life and cold cranking capacity.
More engine power
Removes stator load resulting in more engine power.
Optimize power delivery by switching the stator coils on or off.