Pickup Coil 425 ohms for Suzuki LT 160 E Quadrunner LTF 160 Quadrunner 1989-1999

CAD$ 40.00
Availability: In stock
SKU
RM00157
32101-02C00
Dimensions:
Bracket center to center: 30 mm
Wires length: 380 mm

Wire to wire resistance:
Blue to Green = 425 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink tubes.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil for Stator 425 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup Coil 425 ohms for Suzuki LT 160 E Quadrunner LTF 160 Quadrunner 1989-1999
Your Rating
Customers Also Viewed
Currently there is no product to display.