Pickup Pulsar Coil for Honda TRX 420 450 500 TRX420 TRX450 TRX500 2004-2013

CAD$ 43.00
Availability: In stock
SKU
RM00135
31120-HP0-A00
31120-HP0-A01
31120-HP1-003
31120-HP1-601
31120-HP5-601
31120-HP5-A51
31120-HR0-F01

Dimensions:
Height: 27 mm
Length: 22 mm
Width: 24 mm
Bracket center to center: 34 mm
Wires length : 980 mm

Other specifications:
Number of wires : 2
Wire to wire resistance:
= 250 ohms +/-20%

Not following these instructions may result in damaging

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010""
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil for Stator

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup Pulsar Coil for Honda TRX 420 450 500 TRX420 TRX450 TRX500 2004-2013
Your Rating
Customers Also Viewed
Currently there is no product to display.