Stator Pickup Pulsar Coil for Arctic Cat 650 4x4 Auto / V-Twin 2004-2006

CAD$ 53.00
Availability: In stock

Height: 19mm
Length: 25mm
Width: 22mm
Bracket center to center: 35mm
Wire length pick up to grommet: 140mm
Wire length grommet to plug: 660mm

Wire to wire resistance:
Blue to White = 125ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil for Stator 125 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil for Arctic Cat 650 4x4 Auto / V-Twin 2004-2006
Your Rating
Customers Also Viewed
Currently there is no product to display.