Stator Pickup Pulsar Coil for Can-Am DS 650 Baja / Baja X 2000-2007

• 2007 Can-am DS 650
• 2006 Can-am DS 650
• 2005 Can-am DS 650
• 2004 Can-am DS 650
• 2003 Can-am DS 650
• 2002 Can-am DS 650 Baja
• 2002 Can-am DS 650
• 2001 Can-am DS 650
• 2000 Can-am DS 650

420265153
711265153
711265156

Dimensions:
Height: 22 mm
Length: 25 mm
Width: 23 mm
Bracket center to center: 35 mm
Wires length pickup coil to grommet: 25 mm
Wires length grommet to plug: 400 mm

Other specifications:
Number of wires : 2
Number of plugs: 1
Number of pins: 2

Wire to wire resistance:
Green/White to Blue/Yellow = 295 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.