Stator Pickup Pulsar Coil 200 ohms for Honda TRX 680 Rincon 2006-2014

CAD$ 46.00
Availability: In stock

Height: 18 mm
Length: 25 mm
Width: 22 mm

Bracket center to center: 35 mm

Wires length: 325

Other specifications:
Number of wires: 2
Number of pins: 2

Wire to wire resistance: Blue to Green = 200 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.
  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010メメ.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil 200 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator Pickup Pulsar Coil 200 ohms for Honda TRX 680 Rincon 2006-2014
Your Rating
Customers Also Viewed
Currently there is no product to display.