Pickup Coil 185 ohms for Arctic Cat 350 366 400 425 450 500 / Alterra & TRV 400 450 500 / XC 450 / XR 500 2008-2017
CAD$ 46.00
Availability: In stock
SKU
RM00140
- 2019 Arctic Cat Alterra 450
- 2018 Arctic Cat Alterra 500
- 2017 Arctic Cat XC 450
- 2017 Arctic Cat Alterra TRV 500
- 2017 Arctic Cat Alterra 500
- 2017 Arctic Cat Alterra 400
- 2017 Arctic Cat 500 Automatic
- 2016 Arctic Cat XC 450
- 2016 Arctic Cat Alterra 500
- 2016 Arctic Cat Alterra 450
- 2016 Arctic Cat Alterra 400
- 2016 Arctic Cat 500 Automatic
- 2015 Arctic Cat XR 500
- 2015 Arctic Cat XC 450
- 2015 Arctic Cat TRV 500
- 2015 Arctic Cat 500 Automatic
- 2015 Arctic Cat 450 CR
- 2015 Arctic Cat 400 Automatic
- 2014 Arctic Cat XC 450
- 2014 Arctic Cat TRV 500
- 2014 Arctic Cat TRV 400
- 2014 Arctic Cat 500 Automatic
- 2014 Arctic Cat 450 CR
- 2014 Arctic Cat 400 Automatic
- 2013 Arctic Cat XC 450
- 2013 Arctic Cat TRV 500
- 2013 Arctic Cat TRV 400
- 2013 Arctic Cat 500 Automatic
- 2013 Arctic Cat 450 CR
- 2013 Arctic Cat 400 Automatic
- 2012 Arctic Cat XC 450
- 2012 Arctic Cat TRV 450
- 2012 Arctic Cat 450
- 2012 Arctic Cat 425 CR
- 2012 Arctic Cat 350 CR
- 2011 Arctic Cat XC 450
- 2011 Arctic Cat TRV 450
- 2011 Arctic Cat TRV 400
- 2011 Arctic Cat 450
- 2011 Arctic Cat 425 CR
- 2011 Arctic Cat 366
- 2011 Arctic Cat 350 CR
- 2010 Arctic Cat TRV 400
- 2010 Arctic Cat 450
- 2010 Arctic Cat 366
- 2009 Arctic Cat TRV 400
- 2009 Arctic Cat 366
- 2008 Arctic Cat 366
0802-056
3323-200
3323-200
Dimensions:
Bracket center to center: 35mm
Wires length : 415mm
Other specifications:
Number of wires : 2
Number of pins: N/A
Wire to wire resistance:
Blue to Green = 185 ohms+/-20%
Bracket center to center: 35mm
Wires length : 415mm
Other specifications:
Number of wires : 2
Number of pins: N/A
Wire to wire resistance:
Blue to Green = 185 ohms+/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
- If no spark or erratic spark, switch the wires at the plug.
Brand new pick up coil for Stator 185 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator.
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Write Your Own Review