Stator Pickup Coil 250 ohms for Honda TRX 400 Sportrax EX TRX 400 X 1999-2014

• 2016 Honda CRF 450 R
• 2015 Honda CRF 450 R
• 2014 Honda TRX 400 X
• 2013 Honda TRX 400 X
• 2012 Honda TRX 400 X
• 2009 Honda TRX 400 X
• 2008 Honda TRX 400 EX Sportrax
• 2007 Honda TRX 400 EX Sportrax
• 2006 Honda TRX 400 EX Sportrax
• 2005 Honda TRX 400 EX Sportrax
• 2004 Honda TRX 400 EX Sportrax
• 2003 Honda TRX 400 EX Sportrax
• 2002 Honda TRX 400 EX Sportrax
• 2001 Honda TRX 400 EX Sportrax
• 2000 Honda TRX 400 EX Sportrax
• 1999 Honda TRX 400 EX Sportrax

31120-HN1-000
31120-HN1-003
31120-HN1-A40
31120-HN1-A41
31120-MEN-A91

Dimensions:

Bracket center to center: 35mm
Wire length : 800mm

Other specifications:

Wire to wire resistance:
Blue to Green = 250 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.