Pickup Coil 425 ohms for Suzuki LT 160 E Quadrunner LTF 160 Quadrunner 1989-1999

• 2001 Suzuki LTF 160 Quadrunner
• 2000 Suzuki LTF 160 Quadrunner
• 1999 Suzuki LTF 160 Quadrunner
• 1998 Suzuki LTF 160 Quadrunner
• 1997 Suzuki LTF 160 Quadrunner
• 1996 Suzuki LTF 160 Quadrunner
• 1995 Suzuki LTF 160 Quadrunner
• 1994 Suzuki LTF 160 Quadrunner
• 1993 Suzuki LTF 160 Quadrunner
• 1993 Suzuki LT 160 E Quadrunner
• 1992 Suzuki LTF 160 Quadrunner
• 1992 Suzuki LT 160 E Quadrunner
• 1991 Suzuki LTF 160 Quadrunner
• 1991 Suzuki LT 160 E Quadrunner
• 1990 Suzuki LT 160 E Quadrunner
• 1989 Suzuki LT 160 E Quadrunner

32101-02C00

Dimensions:
Bracket center to center: 30 mm
Wires length: 380 mm

Wire to wire resistance:
Blue to Green = 425 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink tubes.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.