Pickup Coil 116 ohms for Arctic Cat 250 2x4 4x4 300 2x4 4x4 1998-2005

• 2005 Arctic Cat 300
• 2005 Arctic Cat 250
• 2004 Arctic Cat 300
• 2004 Arctic Cat 250
• 2003 Arctic Cat 300
• 2003 Arctic Cat 250
• 2002 Arctic Cat 300
• 2002 Arctic Cat 250
• 2001 Arctic Cat 300
• 2001 Arctic Cat 250
• 2000 Arctic Cat 300
• 2000 Arctic Cat 250
• 1999 Arctic Cat 300
• 1999 Arctic Cat 250
• 1998 Arctic Cat 300
• 1998 Arctic Cat 250

3430-021
3430-069

Dimensions:
Bracket center to center: 30mm
Wires length : 310mm

Other specifications:
Number of wires : 2
Color of wires: Blue/White Green
Number of pins: N/A

Wire to wire resistance:
Blue/White to Green = 116 ohms+/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.