Stator Pickup Coil 200 ohms for Polaris Hawkeye 300 2x4 4x4 Sportsman 4x4 2006-2011

• 2014 Polaris Sportsman 400 HO F/C Carb
• 2013 Polaris Sportsman 400 HO F/C Carb
• 2012 Polaris Sportsman 500 Touring
• 2012 Polaris Sportsman 400 HO F/C Carb
• 2011 Polaris Sportsman 500 Touring
• 2011 Polaris Sportsman 500 HO
• 2011 Polaris Sportsman 400 HO F/C Carb
• 2011 Polaris Hawkeye 300
• 2010 Polaris Sportsman 500 Touring
• 2010 Polaris Sportsman 500 HO EFI
• 2010 Polaris Sportsman 400 HO F/C Carb
• 2010 Polaris Sportsman 300
• 2010 Polaris Hawkeye 300
• 2009 Polaris Sportsman 400 HO F/C Carb
• 2009 Polaris Sportsman 300
• 2009 Polaris Scrambler 500 4x4 Intl
• 2009 Polaris Scrambler 500 2x4 Intl
• 2009 Polaris Ranger 500 Carb
• 2009 Polaris Hawkeye 300
• 2008 Polaris Sportsman 400 HO F/C Carb
• 2008 Polaris Sportsman 300
• 2008 Polaris Hawkeye 300
• 2007 Polaris Hawkeye 300
• 2006 Polaris Hawkeye 300

3089853
3090061

Dimensions:
Bracket center to center: 35mm
Wires length : 950mm

Other specifications:
Number of wires : 2
Color of wires: White White/Red
Number of pins: N/A

Wire to wire resistance:
White to White/red = 200 ohms+/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

• By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
• Insulate your solders with heat shrink.
• Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
• Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
• If no spark or erratic spark, switch the wires at the plug.