Pickup Pulsar Coil for Yamaha V-Max VX Mountain Max 500 600 1994-1996

CAD$ 53.00
Availability: In stock
Height: 20 mm
Length: 23 mm
Width: 20 mm
Bracket center to center: 35 mm
Wires length : 290 mm

Other specifications:

Wire to wire resistance:
White/Red to White/Green = 220 ohms +/-20%

Not following these instructions may result in damaging the part or other components on your vehicle.

  • By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
  • Insulate your solders with heat shrink.
  • Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
  • Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
  • If no spark or erratic spark, switch the wires at the plug.

Brand new pick up coil for Stator 220 ohms

  • We offer a brand new pickup/pulsar coil for you to repair your stator.
  • Often unavailable from the OEM manufacturer
  • All products shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Pickup Pulsar Coil for Yamaha V-Max VX Mountain Max 500 600 1994-1996
Your Rating
Customers Also Viewed
Currently there is no product to display.