Generator Stator + Crankcase Cover Gasket for Yamaha YFM 550 2009-2014 | YFM 700 Grizzly 2007-2015

• 2015 Yamaha YFM 700 Grizzly
• 2014 Yamaha YFM 700 Grizzly
• 2014 Yamaha YFM 550 Grizzly
• 2013 Yamaha YFM 700 Grizzly
• 2013 Yamaha YFM 550 Grizzly
• 2012 Yamaha YFM 700 Grizzly
• 2012 Yamaha YFM 550 Grizzly
• 2011 Yamaha YFM 700 Grizzly
• 2011 Yamaha YFM 550 Grizzly
• 2010 Yamaha YFM 700 Grizzly
• 2010 Yamaha YFM 550 Grizzly
• 2009 Yamaha YFM 700 Grizzly
• 2009 Yamaha YFM 550 Grizzly
• 2008 Yamaha YFM 700 Grizzly
• 2007 Yamaha YFM 700 Grizzly

Dimensions Stator :
Interior diameter : 45 mm
Exterior diameter : 106 mm
Thickness : 27 mm
Length of wires stator to grommet : 100 mm
Length of wires grommet to plug : 550 mm & 1100 mm
Length of pickup coil's wire to grommet : 80 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5

Wire to wire resistance :
Alternator : White between each White = 0.4 ohms +/-20%
Pickup : White to Grey = 500 ohms +/-20%

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".