High Output Stator 200 W for Honda TRX 400 EX Sportrax 1999-2008 | TRX 400 X 2009 TRX 400 X 2012-2014
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2014 Honda TRX 400 X
- 2013 Honda TRX 400 X
- 2012 Honda TRX 400 X
- 2009 Honda TRX 400 X
- 2008 Honda TRX 400 EX Sportrax
- 2007 Honda TRX 400 EX Sportrax
- 2006 Honda TRX 400 EX Sportrax
- 2005 Honda TRX 400 EX Sportrax
- 2004 Honda TRX 400 EX Sportrax
- 2003 Honda TRX 400 EX Sportrax
- 2002 Honda TRX 400 EX Sportrax
- 2001 Honda TRX 400 EX Sportrax
- 2000 Honda TRX 400 EX Sportrax
- 1999 Honda TRX 400 EX Sportrax
Interior diameter: 53 mm
Exterior diameter: 115 mm
Thickness: 14 mm
Length of wires stator to grommet: 90 mm
Length of wires grommet to plug: 560 mm
Length of pickup coil's wire to grommet: 250 mm
Other specifications :
Number of wires: 6
Number of plugs: 2
Number of terminals: 6
Alternator: Green to White = 0.4 ohms +/-20%
Pick up: Blue/Yellow to Green/Red = 230 ohms +/-20%
Source: Black/Red to Brown = 90 ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new stator assembly 200 watts
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connector included
- Rubber grommet included
- All product shipped are tested
20% MORE OUTPUT OVER STOCK, WORK WITH ALL OTHER OEM COMPONENTS.
*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.