Improved Stator for SEM Replacement KTM Husaberg Husqvarna Vertemati 1987-2000
For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.
RM01192
Pickup : Black To Green = 30 ohms +/-20%
Source : Red To Black = 1300 ohms +/-20%
RM01193
Pickup : Black To Green = 179 ohms +/-20%
Source : Red To Black = 1260 ohms +/-20%
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- All year Vertimati Many Models
- All year Husqvarna Many Models
- 2000 KTM 400 LC4
- 2000 Husaberg FC 501
- 1999 KTM 620 LC4
- 1999 KTM 540 LC4
- 1999 KTM 400 LC4
- 1999 Husaberg FC 501
- 1999 Husaberg FC 400
- 1998 KTM 620 LC4
- 1998 KTM 540 LC4
- 1998 KTM 400 LC4
- 1998 Husaberg FX 600 E
- 1998 Husaberg FX 501 E
- 1998 Husaberg FS 600 E
- 1998 Husaberg FE 600 E
- 1998 Husaberg FE 501 E
- 1998 Husaberg FE 501
- 1998 Husaberg FE 400 E
- 1998 Husaberg FE 400
- 1998 Husaberg FC 600
- 1998 Husaberg FC 501
- 1998 Husaberg FC 400
- 1997 KTM 660 LC4
- 1997 KTM 640
- 1997 KTM 620 LC4
- 1997 KTM 400 LC4
- 1997 Husaberg FX 600 E
- 1997 Husaberg FX 501 E
- 1997 Husaberg FE 600 E
- 1997 Husaberg FE 501 E
- 1997 Husaberg FE 501
- 1997 Husaberg FE 400 E
- 1997 Husaberg FE 400
- 1997 Husaberg FC 501
- 1997 Husaberg FC 400
- 1996 KTM 620 LC4
- 1996 KTM 400 LC4
- 1996 Husaberg FE 600 E
- 1996 Husaberg FE 600
- 1996 Husaberg FE 501 E
- 1996 Husaberg FE 501
- 1996 Husaberg FE 400 E
- 1996 Husaberg FE 400
- 1996 Husaberg FE 350 E
- 1996 Husaberg FE 350
- 1996 Husaberg FC 600
- 1996 Husaberg FC 501
- 1996 Husaberg FC 400
- 1996 Husaberg FC 350
- 1995 KTM 620 LC4
- 1995 KTM 600 LC4
- 1995 KTM 400 LC4
- 1995 KTM 350 LC4
- 1995 Husaberg FE 600
- 1995 Husaberg FE 501
- 1995 Husaberg FE 350
- 1995 Husaberg FC 600
- 1995 Husaberg FC 501
- 1994 KTM 620 LC4
- 1994 KTM 600 LC4
- 1994 KTM 400 LC4
- 1994 KTM 350 LC4
- 1994 Husaberg FE 600
- 1994 Husaberg FE 501
- 1994 Husaberg FE 350
- 1994 Husaberg FC 600
- 1994 Husaberg FC 501
- 1994 Husaberg 600 E
- 1994 Husaberg 600 C
- 1994 Husaberg 501 E
- 1994 Husaberg 501 C
- 1994 Husaberg 350 E
- 1993 KTM 600 LC4
- 1993 KTM 400 LC4
- 1993 KTM 350 LC4
- 1993 Husaberg FE 600
- 1993 Husaberg FE 501
- 1993 Husaberg FE 350
- 1993 Husaberg FC 600
- 1993 Husaberg FC 499
- 1993 Husaberg 600 E
- 1993 Husaberg 600 C
- 1993 Husaberg 501 E
- 1993 Husaberg 499 C
- 1993 Husaberg 350 E
- 1992 KTM 600 LC4
- 1992 KTM 500 LC4
- 1992 Husaberg FE 501
- 1992 Husaberg FE 350
- 1992 Husaberg FC 499
- 1992 Husaberg 600 C
- 1992 Husaberg 501 E
- 1992 Husaberg 499 C
- 1992 Husaberg 350 E
- 1991 KTM 600 LC4
- 1991 KTM 500 LC4
- 1991 Husaberg FE 501
- 1991 Husaberg FE 350
- 1991 Husaberg 501 E
- 1991 Husaberg 350 E
- 1990 KTM 600 LC4
- 1990 KTM 500 LC4
- 1990 Husaberg FE 501
- 1990 Husaberg 501 E
- 1989 KTM 600 LC4
- 1989 KTM 500 LC4
- 1989 Husaberg FE 501
- 1988 KTM 600 LC4
- 1988 KTM 500 LC4
- 1987 KTM 600 LC4
RM01192-R00
Interior diameter : 28mm
Exterior diameter : 91mm
Thickness : 23mm
Length of wires stator to terminal : 677mm
Other specifications :
Number of wires : 6
Number of plugs : N/A
Number of pins : 6
Wire to wire resistance :
Alternator : Yellow Between each Yellow = 0.4 ohms +/-20%
Pickup : Black To Green = 30 ohms +/-20%
Source : Black To Red = 1300 ohms +/-20%
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new improved stator
- May look different but it's still a direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Pick up Coil included
- All product shipped are tested
All item pictures are accurate
This stator has a different design than the original but it's a direct fit.