Improved Stator for SEM Replacement Husaberg Husqvarna European Models 1999-2003
For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.
RM01192
Pickup : Black To Green = 30 ohms +/-20%
Source : Red To Black = 1300 ohms +/-20%
RM01193
Pickup : Black To Green = 179 ohms +/-20%
Source : Red To Black = 1260 ohms +/-20%
For Husqvarna models, compare the resistances of your original stator with ours on the "Specifications" tab.
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- All Year Husqvarna Many Models
- 2003 Husaberg FX 650 E
- 2003 Husaberg FS 650 E
- 2003 Husaberg FS 400 E
- 2003 Husaberg FE 650 E
- 2003 Husaberg FE 501 E
- 2003 Husaberg FE 400 E
- 2002 Husaberg FX 650 E
- 2002 Husaberg FX 470 E
- 2002 Husaberg FS 650 E
- 2002 Husaberg FE 650 E
- 2002 Husaberg FE 501 E
- 2002 Husaberg FE 400 E
- 2002 Husaberg FC 550
- 2002 Husaberg FC 470 E
- 2002 Husaberg FC 470
- 2001 Husaberg FX 650 E
- 2001 Husaberg FX 470 E
- 2001 Husaberg FE 650 E
- 2001 Husaberg FE 501 E
- 2001 Husaberg FE 400 E
- 2001 Husaberg FC 550
- 2001 Husaberg FC 470
- 2000 Husaberg FX 600 E
- 2000 Husaberg FE 600 E
- 2000 Husaberg FE 600
- 2000 Husaberg FE 501 E
- 2000 Husaberg FE 501
- 2000 Husaberg FE 400 E
- 2000 Husaberg FE 400
- 2000 Husaberg FC 600
- 1999 Husaberg FX 600 E
- 1999 Husaberg FX 501 E
- 1999 Husaberg FS 600 E
- 1999 Husaberg FE 600 E
- 1999 Husaberg FE 501 E
- 1999 Husaberg FE 501
- 1999 Husaberg FE 400 E
- 1999 Husaberg FE 400
- 1999 Husaberg FC 600
250 202-01
250 286-01
250 272-01
250 285-01
250-285-01
Interior diameter : 28mm
Exterior diameter : 91mm
Thickness : 23mm
Length of wires stator to plug : 700mm
Other specifications :
Number of wires : 6
Number of plugs : 6
Number of pins : 6
Wire to wire resistance :
Alternator :Yellow Between each Yellow = 0.4 ohms +/-20%
Pickup : Black To Green = 179 ohms +/-20%
Source : Red To Black = 1260 ohms +/-20%
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new improved SEM Direct replacment stator
- Direct replacement of original SEM manufactured stator even if the look is different
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Produces a stronger spark when starting and offers a reliable performance
- Pick up coil included
- All product shipped are tested
All item pictures are accurate
This stator has a different design than your original how ever it is a direct fit.