Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2006 Lynx 5900 FCE
2005 Lynx Enduro 400
2005 Lynx 5900 FCE
2004 Lynx Enduro 400
2004 Lynx 5900 FCE
2003 Ski-doo Skandic 500 Sport Carb F/C
2003 Lynx Enduro 400
2003 Lynx 5900 FCE
2002 Ski-doo Summit 500 Carb F/C
2002 Ski-doo MX Z 500 Carb F/C
2002 Ski-doo MX Z 380 Carb F/C
2002 Ski-doo Legend 500 Carb F/C
2002 Ski-doo Legend 380 Carb F/C
2002 Ski-doo Grand Touring 500 Carb F/C
2002 Ski-doo Grand Touring 380 Carb F/C
2002 Lynx Safari 400
2002 Lynx Ranger FCE
2002 Lynx Explorer 500
2002 Lynx Enduro 550F
2002 Lynx Enduro 400
2002 Lynx 5900 FCE

Interchange Part No

420889360

Specifications

Dimensions :
Interior diameter : 43 mm
Exterior diameter : 96 mm
Thickness : 20 mm
Length of wires stator to connectors : 160 mm & 210 mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 7

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +/-20%
Source : Black to Red = 5.0 ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original. `
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Details