Stator for Arctic Cat Z1 TZ1 XF Bearcat 1100 F 1100 M 1100 2007-2017
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2017 Arctic Cat ZR 5000 LXR EFI L/C
- 2016 Arctic Cat ZR 9000 Sno Pro EFI L/C
- 2016 Arctic Cat ZR 9000 LXR EFI L/C
- 2016 Arctic Cat ZR 5000 LXR EFI L/C
- 2016 Arctic Cat XF 9000 LXR EFI L/C
- 2016 Arctic Cat M 9000
- 2015 Arctic Cat ZR 9000 Sno Pro EFI L/C
- 2015 Arctic Cat ZR 9000 El Tigre EFI L/C
- 2015 Arctic Cat ZR 5000 LXR EFI L/C
- 2015 Arctic Cat XF 9000 LXR EFI L/C
- 2015 Arctic Cat M 9000
- 2014 Arctic Cat ZR 5000 LXR EFI L/C
- 2014 Arctic Cat XF 9000 LXR EFI L/C
- 2014 Arctic Cat TZ 1 LXR
- 2014 Arctic Cat TZ 1
- 2014 Arctic Cat M 9000
- 2014 Arctic Cat Bearcat Z1 XT GS
- 2014 Arctic Cat Bearcat Z1 XT
- 2013 Arctic Cat XF 1100 Turbo LXR EFI L/C
- 2013 Arctic Cat TZ 1 LXR Turbo
- 2013 Arctic Cat TZ 1 LXR
- 2013 Arctic Cat TZ 1
- 2013 Arctic Cat Procross F1100 Sno Pro RR
- 2013 Arctic Cat Procross F1100 Sno Pro Limited
- 2013 Arctic Cat Procross F1100 Sno Pro
- 2013 Arctic Cat Procross F1100 LXR
- 2013 Arctic Cat Proclimb XF 1100 Turbo Sno Pro High Country LTD
- 2013 Arctic Cat Proclimb XF 1100 Turbo Sno Pro High Country
- 2013 Arctic Cat ProCross XF 1100 Sno Pro EFI L/C
- 2013 Arctic Cat ProCross XF 1100 CrossTour Turbo EFI L/C
- 2013 Arctic Cat ProCross XF 1100 CrossTour EFI L/C
- 2013 Arctic Cat ProCross F1100 EFI L/C
- 2013 Arctic Cat ProClimb M1100 Turbo
- 2013 Arctic Cat ProClimb M1100
- 2013 Arctic Cat Bearcat Z1 XT GS
- 2013 Arctic Cat Bearcat Z1 XT
- 2012 Arctic Cat TZ 1 LXR Turbo
- 2012 Arctic Cat TZ 1 LXR
- 2012 Arctic Cat TZ 1
- 2012 Arctic Cat ProCross XF 1100 Turbo EFI L/C
- 2012 Arctic Cat ProCross XF 1100 Sno Pro EFI L/C
- 2012 Arctic Cat ProCross F1100 Turbo EFI L/C
- 2012 Arctic Cat ProCross F1100 EFI L/C
- 2012 Arctic Cat ProClimb M1100 Turbo
- 2012 Arctic Cat ProClimb M1100
- 2012 Arctic Cat Bearcat Z1 XT GS
- 2012 Arctic Cat Bearcat Z1 XT
- 2011 Arctic Cat Z1 Turbo LXR EFI L/C
- 2011 Arctic Cat Z1 Turbo EFI L/C
- 2011 Arctic Cat Z1 LXR EFI L/C
- 2011 Arctic Cat Z1 EFI L/C
- 2011 Arctic Cat TZ 1 LXR Turbo
- 2011 Arctic Cat TZ 1 LXR
- 2011 Arctic Cat TZ 1
- 2011 Arctic Cat Bearcat Z1 XT
- 2010 Arctic Cat Z1 Turbo LXR EFI L/C
- 2010 Arctic Cat Z1 Turbo EFI L/C
- 2010 Arctic Cat Z1 LXR EFI L/C
- 2010 Arctic Cat Z1 EFI L/C
- 2010 Arctic Cat TZ 1 LXR Turbo
- 2010 Arctic Cat TZ 1 LXR
- 2010 Arctic Cat TZ 1
- 2010 Arctic Cat Bearcat Z1 XT
- 2009 Arctic Cat Z1 Turbo LXR EFI L/C
- 2009 Arctic Cat Z1 Turbo EFI L/C
- 2009 Arctic Cat Z1 LXR EFI L/C
- 2009 Arctic Cat Z1 EFI L/C
- 2009 Arctic Cat TZ 1 LXR Turbo
- 2009 Arctic Cat TZ 1 LXR
- 2009 Arctic Cat TZ 1
- 2009 Arctic Cat Bearcat Z1 XT
- 2008 Arctic Cat TZ 1 LXR
- 2008 Arctic Cat TZ 1
- 2008 Arctic Cat Jaguar Z1 1100 EFI L/C
- 2007 Arctic Cat Jaguar Z1 1100 EFI L/C
Pick-up 1 resistance (Blue to Green) : 215 ohms +/- 20%
Number of wires : 5
Number of plugs : 2
Number of terminals : 5
Harness length - Stator to grommet (mm) : 80
Harness length - Grommet to plug (mm) : 400
Pick-up coil wire length - Coil to grommet (mm) : 35
Inside diameter (mm) : 40
Outside diameter (mm) : 113
Thickness (mm) : 20
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation.
- Highest grade lamination materials
- Highest grade copper windings, resistant to 200 degrees Celsius.
- Connector included
- Rubber grommet included
- Pick-up coil included
- All product shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.