Stator for Arctic Cat ZR / ZRT / Mountain Cat / Triple Touring / ZL 500 600 2001-2002

• 2002 Arctic Cat ZRT 600 Carb L/C
• 2002 Arctic Cat ZR 600 Carb L/C
• 2002 Arctic Cat ZR 500 LE Carb L/C
• 2002 Arctic Cat ZR 500 Carb L/C
• 2002 Arctic Cat ZL 500 Carb L/C
• 2002 Arctic Cat Mountain Cat 500 Carb L/C
• 2001 Arctic Cat ZRT 600 Carb L/C
• 2001 Arctic Cat ZR 600 Carb L/C
• 2001 Arctic Cat ZR 500 Carb L/C
• 2001 Arctic Cat Triple Touring 600 Carb L/C

Dimensions :
Interior diameter : 48 mm
Exterior diameter : 115 mm
Thickness : 27 mm
Length of wires stator to grommet : 30 mm
Length of wires grommet to plug : 150 mm

Other specifications :
Number of wires : 9
Number of plugs : 6
Number of pins : 10

Wire to wire resistance :
Alternator : Yellow to Yellow = 0.4 ohms +/-20%
Source : Yellow/Red to Red/Yellow = 1.3 ohms +/-20%

Before installing your new Stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".