Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2024 Can-Am DS 250
2023 Can-Am DS 250
2022 Can-Am DS 250
2021 Can-Am DS 250
2020 Can-Am DS 250
2019 Can-Am DS 250
2018 Can-Am DS 250
2017 Can-Am DS 250
2016 Can-Am DS 250
2015 Can-Am DS 250
2014 Can-Am DS 250
2013 Can-Am DS 250
2012 Can-Am DS 250
2011 Can-Am DS 250
2010 Can-Am DS 250
2009 Can-Am DS 250
2008 Can-Am DS 250 CVT

Interchange Part No

S31120RCA000

Specifications

Dimensions:
Interior diameter: 41 mm
Exterior diameter: 103 mm
Thickness: 25 mm
Length of wires stator to grommet: 120 mm
Length of wires grommet to plug: 700 mm
Length of pickup coil's wire to grommet: 40 mm

Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 5

Wire to wire resistance:
Alternator: Yellow between each Yellow = 0.2 ohms +/-20%
Pickup: Green to Blue = 500 ohms =+/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details