Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2005 Honda TRX 250 EX Sportrax
2004 Honda TRX 250 Recon TM
2004 Honda TRX 250 Recon TE
2004 Honda TRX 250 EX Sportrax
2003 Honda TRX 250 Recon TM
2003 Honda TRX 250 Recon TE
2003 Honda TRX 250 EX Sportrax
2002 Honda TRX 250 Recon TM
2002 Honda TRX 250 Recon TE
2002 Honda TRX 250 EX Sportrax
2001 Honda TRX 250 Recon
2001 Honda TRX 250 EX Sportrax
2000 Honda TRX 250 Recon
1999 Honda TRX 250 Recon
1998 Honda TRX 250 Recon
1997 Honda TRX 250 Recon

Interchange Part No

31120-HM8-004

Specifications

Dimensions :
Interior diameter : 34 mm
Exterior diameter : 88 mm
Thickness : 18 mm
Length of wires stator to grommet : 95 mm
Length of wires grommet to plug : 250 mm
Length of pickup coil's wire to grommet : 110 mm

Other specifications :
Number of wires : 5
Number of plugs : 3
Number of pins : 5

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +/-20%
Pickup : Blue/Yellow to Green = 280 ohms +/-20%
Source : Black/Red to Green = 190 ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details