Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2005 Can-Am Traxter Max 650
2005 Can-Am Traxter Max 500
2005 Can-Am Traxter 650
2005 Can-Am Traxter 500
2004 Can-Am Traxter Max 500
2004 Can-Am Traxter 500
2003 Can-Am Traxter Max 500
2003 Can-Am Traxter 500
2002 Can-Am Traxter 500
2001 Can-Am Traxter 500
2000 Can-Am Traxter 500
1999 Can-Am Traxter 500

Interchange Part No

420296321

Specifications

Dimensions :
Interior diameter : 53 mm
Exterior diameter : 115 mm
Thickness : 24 mm
Length of Stator to plug : 183 mm
Length of pickup coil's wire to stator : 70 mm

Other specifications :
Number of wires : 6
Number of plugs : 1
Number of pins : 6

Alternator :Yellow between each Yellow = 0.4 ohms +-20%
Pickup :Blue to White = 245 ohms +-20%
Other : Black to Ground = O.L. ON DISPLAY

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details