Stator for Suzuki LT-A 450 X King Quad AXi 2007-2010 | LT-A 500 X King Quad AXi 2009-2018 OEM# 32101-11H00 32101-11H01

• 2018 Suzuki LTA 500 X KingQuad
• 2017 Suzuki LTA 500 X KingQuad
• 2016 Suzuki LTA 500 X KingQuad
• 2015 Suzuki LTA 500 X KingQuad
• 2014 Suzuki LTA 500 X KingQuad
• 2013 Suzuki LTA 500 X KingQuad
• 2012 Suzuki LTA 500 X KingQuad
• 2011 Suzuki LTA 500 X KingQuad
• 2010 Suzuki LTA 450 X KingQuad
• 2009 Suzuki LTA 500 X KingQuad
• 2009 Suzuki LTA 450 X KingQuad
• 2008 Suzuki LTA 450 X KingQuad
• 2007 Suzuki LTA 450 X KingQuad

32101-11H00
32101-11H01

Alternator resistance (Yellow to Yellow) : 0.4 ohms +/- 20%
Pick-up 1 resistance (Blue to White) : 220 ohms +/- 20%
Number of wires : 5
Number of plugs : 2
Number of terminals : 5
Harness length - Stator to grommet (mm) : 150
Harness length - Grommet to plug (mm) : 240
Pick-up coil wire length - Coil to grommet (mm) : 100
Inside diameter (mm) : 53
Outside diameter (mm) : 115
Thickness (mm) : 18

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".