Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2004 Kawasaki KSF 250 Mojave
2003 Kawasaki KSF 250 Mojave
2002 Kawasaki KSF 250 Mojave
2001 Kawasaki KSF 250 Mojave
2000 Kawasaki KSF 250 Mojave
1999 Kawasaki KSF 250 Mojave
1998 Kawasaki KSF 250 Mojave
1997 Kawasaki KSF 250 Mojave
1996 Kawasaki KSF 250 Mojave
1995 Kawasaki KSF 250 Mojave
1994 Kawasaki KSF 250 Mojave
1993 Kawasaki KSF 250 Mojave
1992 Kawasaki KSF 250 Mojave
1991 Kawasaki KSF 250 Mojave
1990 Kawasaki KSF 250 Mojave
1989 Kawasaki KSF 250 Mojave
1988 Kawasaki KSF 250 Mojave
1987 Kawasaki KSF 250 Mojave

Interchange Part No

21003-1155

Specifications

Dimensions :
Interior diameter : 41mm
Exterior diameter : 103mm
Thickness : 14mm
Length of wires stator to grommet : 75mm
Length of wires grommet to plug : 420mm & 860mm

Other specifications :
Number of wires : 6
Number of plugs : 2
Number of pins : 6

Wire to wire resistance :
Alternator : Yellow to Black/Yellow = 0.4ohms +/-20%
Source : Black/Red to Black/White = 95ohms +/-20%
Other : Red to Red = 0.7ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.

Details