Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

Qty:

Share This Product:

Vehicle Fitment

2005 Aprilia RSV 1000 Tuono R
2004 Aprilia RSV 1000 Tuono R
2003 Aprilia SL 1000 Falco
2003 Aprilia RSV Mille R
2003 Aprilia RSV 1000 Tuono R
2002 Aprilia SL 1000 Falco
2002 Aprilia RSV Mille R
2002 Aprilia RSV 1000 Tuono R
2001 Aprilia SL 1000 Falco
2001 Aprilia RSV Mille R
2000 Aprilia SL 1000 Falco
2000 Aprilia RSV Mille R
1999 Aprilia RSV Mille
1998 Aprilia RSV Mille

Interchange Part No

AP0295830

Specifications

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 24 mm
Length of wires stator to grommet : 125 mm
Length of wires grommet to plug : 250 mm
Length of pickup coil's wire to grommet : 50 mm

Other specifications :
Number of wires : 5
Number of plugs : 1
Number of pins : 5

Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +/-20%
Pickup : White to Blue/White = 240 ohms +/-20%

Installation

Before installing your new stator

Check the AC output of the stator
Replace any burned or corroded connectors on stator and regulator/rectifier
Check and repair any melted wiring
Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Details