Stator for Yamaha AR LX 210 Exciter 135 270 LS 2000 XL GP SUV 1200 1997-2005

• 2005 Yamaha LX 210
• 2005 Yamaha AR 210
• 2004 Yamaha Waverunner SUV 1200
• 2004 Yamaha LX 210
• 2004 Yamaha AR 210
• 2003 Yamaha Waverunner SUV 1200
• 2003 Yamaha LX 210
• 2003 Yamaha LS 2000
• 2003 Yamaha AR 210
• 2002 Yamaha Waverunner SUV 1200
• 2002 Yamaha LX 2000
• 2002 Yamaha LS 2000
• 2001 Yamaha Waverunner SUV 1200
• 2001 Yamaha LS 2000
• 2000 Yamaha Waverunner SUV 1200
• 2000 Yamaha LS 2000
• 1999 Yamaha Waverunner SUV 1200
• 1999 Yamaha Waverunner GP 1200
• 1999 Yamaha LS 2000
• 1999 Yamaha Exciter 270
• 1999 Yamaha Exciter 135
• 1998 Yamaha Waverunner XL 1200
• 1998 Yamaha Waverunner GP 1200
• 1998 Yamaha Exciter 270
• 1998 Yamaha Exciter 135
• 1997 Yamaha Waverunner GP 1200

Dimensions :
Interior diameter : 42 mm
Exterior diameter : 107 mm
Thickness : 10 mm
Length of wires stator to 1st grommet : 180 mm
Length of wires between grommets : 765 mm
Length of wires 2nd grommet to plug t : 55 mm

Other specifications :
Number of wires : 6
Number of plugs : 4
Number of pins : 6

Wire to wire resistance :
Alternator : Green to Green = 1.0 ohms +/-20%
Source 1 : Black to Blue = 757 ohms +/-20%
Source 2 : Black to Red = 183 ohms +/-20%

Before installing your new stator

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010’’.