Stator for Sea-Doo GSX 800 951 / SPX 800 / GTI 800 / GTX 800 951 / RX 951 / XP 951 / LRV 951 1995-2005
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2005 Sea-doo 800 GTI RFI
- 2005 Sea-doo 800 GTI LE RFI
- 2005 Sea-doo 3D RFI 800 cc
- 2004 Sea-doo 800 GTI RFI
- 2004 Sea-doo 800 GTI LE RFI
- 2003 Sea-doo 800 GTI LE RFI
- 2002 Sea-doo 800 GTX RFI
- 2001 Sea-doo 800 GTX RFI
- 2001 Sea-doo 800 GSX RFI
- 2000 Sea-doo 800 GTX RFI
- 2000 Sea-doo 800 GSX RFI
- 1999 Sea-doo 800 GTX RFI
- 1999 Sea-doo 800 GSX RFI
- 1998 Sea-doo 800 GTX RFI
Interior diameter : 35mm
Exterior diameter : 93mm
Thickness : 22mm
Length of wires stator to grommet : 102mm
Other specifications :
Number of wires : 4
Number of plugs : 1
Wire to wire resistance :
Alternator : Yellow to Yellow = 0.6ohms +/-20%
Before installing your new stator
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- You must re-install your original connector and grommet (see picture).
- Once your connector and grommet is re-installed, our part becomes a plug-and-play unit, direct fit, and very easy to install.
- Higher grade of electric components.
- Highest grade copper windings, resistant to 200 degrees Celsius.
- All products shipped are tested
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.