Voltage Regulator Rectifier for Yamaha Royal Star 1300 TDM 850 XV 250 Virago 1993-2001
CAD$ 164.00
Availability: In stock
Only 2 left
SKU
RM30406
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2001 Yamaha Royal Star Tour Deluxe 1300
- 2001 Yamaha Royal Star Boulevard 1300
- 2000 Yamaha Royal Star Tour Deluxe 1300
- 2000 Yamaha Royal Star Tour Classic 1300
- 2000 Yamaha Royal Star Boulevard 1300
- 1999 Yamaha Royal Star Tour Deluxe 1300
- 1999 Yamaha Royal Star Tour Classic 1300
- 1999 Yamaha Royal Star Boulevard 1300
- 1998 Yamaha Royal Star Tour Deluxe 1300
- 1998 Yamaha Royal Star Tour Classic 1300
- 1998 Yamaha Royal Star Boulevard 1300
- 1997 Yamaha Royal Star Tour Deluxe 1300
- 1997 Yamaha Royal Star Tour Classic 1300
- 1997 Yamaha Royal Star Deluxe 1300
- 1997 Yamaha Royal Star 1300
- 1996 Yamaha Royal Star Tour Classic 1300
- 1996 Yamaha Royal Star 1300
- 1995 Yamaha Virago 250
- 1993 Yamaha TDM 850
3LS-81960-00-00
3LS-81960-01-00
3VD-81960-00-00
3VD-81960-01-00
3LS-81960-01-00
3VD-81960-00-00
3VD-81960-01-00
Dimensions :
Width : 80 mm
Length : 103 mm
Height: 31 mm
Wire Length: 440 mm & 285 mm Fixation holes center to center : 72 mm
Other specifications :
Number of plugs : 2
Number of pins : 7
Number of wires : 7
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
Width : 80 mm
Length : 103 mm
Height: 31 mm
Wire Length: 440 mm & 285 mm Fixation holes center to center : 72 mm
Other specifications :
Number of plugs : 2
Number of pins : 7
Number of wires : 7
Minimum Charging Voltage: 14.5V +/- 0.5V
Maximum Charging Current: 25A-35A/300W-500W
Open Circuit Voltage: <15V
Operation Temperature: -20⁰ to 85⁰
Before installing your new voltage regulator rectifier;
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator/rectifier
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Warning:
Risk of electric shock. Disconnect the battery before servicing.
Ensure proper installation by a qualified technician to avoid malfunction.
Brand new voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- Improved heat sink and charging capabilities
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.
Write Your Own Review