Stator for Arctic Cat 150 Utility 2x4 EFI L/C 2009-2019 | OEM Repl.# 3304-967 / 3304-968
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2019 Arctic Cat 150 Utility 2x4 Carb L/C
- 2018 Arctic Cat 150 Utility 2x4 Carb L/C
- 2017 Arctic Cat 150 Utility 2x4 Carb L/C
- 2016 Arctic Cat 150 Utility 2x4 Carb L/C
- 2015 Arctic Cat 150 Utility 2x4 Carb L/C
- 2014 Arctic Cat 150 Utility 2x4 Carb L/C
- 2013 Arctic Cat 150 Utility 2x4 Carb L/C
- 2012 Arctic Cat 150 Utility 2x4 Carb L/C
- 2011 Arctic Cat 150 Utility 2x4 Carb L/C
- 2010 Arctic Cat 150 Utility 2x4 Carb L/C
- 2009 Arctic Cat 150 Utility 2x4 Carb L/C
3304-968
Dimensions :
Interior diameter : 32 mm
Exterior diameter : 88.5 mm
Thickness : 17 mm
Length of wires stator to grommet : 110 mm
Length of wires grommet to plug : 740 mm
Length of pickup coil's wire to grommet : 80 mm
Other specifications :
Number of wires : 6
Number of plugs : 3
Number of pins : 6
Number of poles : 10
Wire to wire resistance :
Alternator : Between each Yellow = 0.4 ohms +-20%
Pickup : Blue to Green = 100 ohms +-20%
Source : Black/Red to Ground = 450 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.