Stator for BMW Motorcycle R1200 GS | R1200 R | R1200 RS | R1200 RT 2012-2018 | OEM # 12318356824 12317724032 12318526908
Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2018 BMW R1200 RT
- 2018 BMW R1200 RS
- 2018 BMW R1200 R
- 2018 BMW R1200 GS
- 2017 BMW R1200 RT
- 2017 BMW R1200 RS
- 2017 BMW R1200 R
- 2017 BMW R1200 GS
- 2016 BMW R1200 RT
- 2016 BMW R1200 RS
- 2016 BMW R1200 R
- 2016 BMW R1200 GS
- 2015 BMW R1200 RT
- 2015 BMW R1200 RS
- 2015 BMW R1200 R
- 2015 BMW R1200 GS
- 2014 BMW R1200 RT
- 2014 BMW R1200 RS
- 2014 BMW R1200 R
- 2014 BMW R1200 GS
- 2013 BMW R1200 RT
- 2013 BMW R1200 GS
- 2008 BMW R1200 GS
Interior diameter : 60 mm
Exterior diameter :133 mm
Thickness : 18 mm
Length of wires stator to grommet : 68 mm
Length of wires grommet to plug : 470 mm
Other specifications :
Number of wires : 3
Number of plugs : 1
Number of pins : 3
Number of poles : 21
Wire to wire resistance :
Alternator 3p : Between each Yellow = 0.4 ohms +-20%
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Connectors included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.