Stator for Aprilia ETV Caponord 1200 Europe / America / Carabinieri / Rally 2013-2017 | OEM Repl.# 680199

• 2017 Aprilia ETV 1200 Caponord Rally America
• 2016 Aprilia ETV 1200 Caponord Rally
• 2016 Aprilia ETV 1200 Caponord Europe
• 2015 Aprilia ETV 1200 Caponord Rally
• 2015 Aprilia ETV 1200 Caponord Europe
• 2015 Aprilia ETV 1200 Caponord Carabinieri
• 2015 Aprilia ETV 1200 Caponord America
• 2014 Aprilia ETV 1200 Caponord Europe
• 2013 Aprilia ETV 1200 Caponord Europe

Dimensions :
Interior diameter : 56 mm
Exterior diameter : 27 mm
Thickness : 33 mm
Length of wires stator to grommet : 103 mm
Length of wires grommet to plug : 665 mm
Length of pickup coil's wire to grommet : 87 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5
Number of poles : 18

Alternator : Yellow to Yellow = 4 ohms +-20%
Pickup : White/Yellow to Blue/Yellow = 250 ohms +-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".