Stator for KTM 65 SX 2009-2020 / Mini 2018 / SXS 2012-2013 / XC 2009 | Husqvarna TC 65 2017-2020 | OEM # 46239004000
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2020 KTM 65 SX
- 2020 Husqvarna TC 65
- 2019 KTM 65 SX
- 2019 Husqvarna TC 65
- 2018 KTM 65 SX Mini
- 2018 Husqvarna TC 65
- 2017 KTM 65 SX
- 2017 Husqvarna TC 65
- 2016 KTM 65 SX
- 2015 KTM 65 SX
- 2014 KTM 65 SX
- 2013 KTM 65 SXS
- 2013 KTM 65 SX
- 2012 KTM 65 SXS
- 2012 KTM 65 SX
- 2011 KTM 65 SX
- 2010 KTM 65 SX
- 2009 KTM 65 XC
- 2009 KTM 65 SX
Dimensions :
Interior diameter : 28 mm
Exterior diameter : 61 mm
Thickness : 14 mm
Length of wires stator to grommet : 120 mm
Length of wires grommet to plug : 500 mm
Other specifications :
Number of wires : 4
Number of plugs : 1
Number of pins : 4
Number of poles : 8
Wire to wire resistance :
Source : Red to Blue = 18 ohms +-20%
Pickup : White/Red to White/Green = 100 ohms +-20%
Before installing your new Stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator might have a different wire color code than your original part.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible but no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- Back Plate included
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause of repetitive electrical issues.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.