Generator Stator for Suzuki LTA 500 KingQuad AXi / AXi SE 2019-2021 | OEM Repl.# 32101-35K00

• 2022 Suzuki LTA 500 KingQuad AXi EPS SE
• 2022 Suzuki LTA 500 KingQuad AXi EPS
• 2022 Suzuki LTA 500 KingQuad AXi
• 2021 Suzuki LTA 500 KingQuad AXi EPS SE
• 2021 Suzuki LTA 500 KingQuad AXi EPS
• 2021 Suzuki LTA 500 KingQuad AXi
• 2020 Suzuki LTA 500 KingQuad AXi EPS SE
• 2020 Suzuki LTA 500 KingQuad AXi EPS
• 2020 Suzuki LTA 500 KingQuad AXi
• 2019 Suzuki LTA 500 KingQuad AXi EPS SE
• 2019 Suzuki LTA 500 KingQuad AXi EPS
• 2019 Suzuki LTA 500 KingQuad AXi

Dimensions :
Interior diameter : 54 mm
Exterior diameter : 115 mm
Thickness : 21 mm
Length of wires stator to grommet : 175 mm
Length of wires grommet to plug : 310 mm
Length of pickup coil's wire to grommet : 120 mm

Other specifications :
Number of wires : 5
Number of plugs : 2
Number of pins : 5
Number of poles : 18

Wire to wire resistance :
Alternator : Black to Black = 0.5 ohms +-20%
Pickup : White to Blue = 209 ohms +-20%

Before installing your new stator

• Check the AC output of the stator
• Replace any burned or corroded connectors on stator and regulator rectifier
• Check and repair any melted wiring
• Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".