70W High Output Stator for KTM 250 350 SX-F / XC-F 2011-2015 / Husqvarna FC 250 350 2014-15 | 77139004000 77239004000
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2015 KTM 350 XC-F
- 2015 KTM 350 SX-F
- 2015 KTM 250 XC-F
- 2015 KTM 250 SX-F
- 2015 Husqvarna FC 350
- 2015 Husqvarna FC 250
- 2014 KTM 350 XC-F
- 2014 KTM 350 SX-F
- 2014 KTM 250 XC-F
- 2014 KTM 250 SX-F
- 2014 Husqvarna FC 350
- 2014 Husqvarna FC 250
- 2013 KTM 350 XC-F
- 2013 KTM 350 SX-F
- 2013 KTM 250 XC-F
- 2013 KTM 250 SX-F
- 2012 KTM 350 XC-F
- 2012 KTM 350 SX-F
- 2012 KTM 250 XC-F
- 2012 KTM 250 SX-F
- 2011 KTM 350 SX-F
- 2011 KTM 250 XC-F
- 2011 KTM 250 SX-F
77239004000
Dimensions:
Interior diameter: 29 mm
Exterior diameter: 77 mm
Thickness: 21 mm
Length of wires stator to grommet: 120 mm
Length of wires grommet to plug: 520 mm
Length of pickup coil's wire to grommet: 90 mm
Other specifications:
Number of wires: 4
Number of plugs: 1
Number of pins: 4
Number of poles: 12
Wire to wire resistance:
Alternator: Yellow to Yellow = 0.4 ohms +-20%
Alternator: Yellow to ground = O.L
Pickup: Red to Green = 130 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- 70 Watt DC
- This stator increase power output significantly
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- All products shipped are tested
20% MORE OUTPUT OVER STOCK, WORKS WITH ALL OTHER OEM COMPONENTS.
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.