Voltage Regulator Rectifier for Sym Shark Euro MX Jet Euro X Jet Arrow 1999-2007 Can-am DS70 DS90 CVT X 2008-2020 mini
Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.
- 2020 Can-am DS 90 4-Stroke
- 2020 Can-am DS 70 2x4
- 2019 Can-am DS 90 4-Stroke
- 2019 Can-am DS 70 2x4
- 2018 Can-am DS 90 4-Stroke
- 2018 Can-am DS 70 2x4
- 2017 Can-am DS 90 4-Stroke
- 2017 Can-am DS 70 2x4
- 2016 Can-am DS 90 4-Stroke
- 2015 Can-am DS 90 4-Stroke
- 2015 Can-am DS 70 2x4
- 2014 Can-am DS 90 4-Stroke
- 2014 Can-am DS 70 2x4
- 2013 Can-am DS 90 4-Stroke
- 2013 Can-am DS 70 2x4
- 2012 Can-am DS 90 4-Stroke
- 2012 Can-am DS 70 2x4
- 2011 Can-am DS 90 4-Stroke
- 2011 Can-am DS 70 2x4
- 2010 Can-am DS 90 4-Stroke
- 2010 Can-am DS 70 2x4
- 2009 Can-am DS 90 4-Stroke
- 2009 Can-am DS 70 2x4
- 2008 Can-am DS 90 4-Stroke
- 2008 Can-am DS 70 2x4
- 2007 Sym Jet 50 Euro X
- 2006 Sym Jet Arrow 50
- 2006 Sym Jet 50 Euro X
- 2005 Sym Jet 50 Euro X
- 2004 Sym Jet 50 Euro X
- 2004 Sym Euro MX 125
- 2003 Sym Jet 50 Euro X
- 2003 Sym Euro MX 125
- 2002 Sym Shark 125
- 2002 Sym Euro MX 125
- 2001 Sym Shark 125
- 2000 Sym Shark 125
- 1999 Sym Shark 125
V31600CJF000LL
31600-M9Q-000
Dimensions:
Width: 62 mm
Length: 70 mm
Height: 26 mm
Wires length: 195 mm
Fixation holes center to center: 55 mm
Other specifications:
Number of plugs: 1
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5V +- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: 15V
Operation Temperature: -20⁰ to 85⁰
Before installing your new voltage regulator rectifier:
- Check the AC output of the stator.
- Replace any burned or corroded connectors on stator and regulator rectifier.
- Check and repair any melted wiring.
- Use hi-temp dielectric grease on all connectors.
Brand new aftermarket voltage regulator rectifier
- Direct replacement to your original unit.
- Plug-and-play, direct fit, easy installation.
- No assembly required
- Higher grade of electric components.
- The quality exceeds the OEM equipment
- All products shipped are tested
We have even included the opposite connector (main harness side) as we know these are often melted / corroded / defective and a major cause for repetitive electrical issues.
All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.