Voltage Regulator for Honda NSR125 NX125 1988-1993 / SYM Jet 50 Euro 125 150 MX 2001-2017 / Kymco Zing 125 1997 1998

CAD$ 74.00
Availability: In stock
SKU
RMS020-102643

Battery condition is extremely important. No voltage regulator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

31600-KBB-901
31600-KR1-761
31600-KY7-000
31600-N28-000
31600-KG7-0010

Dimensions:
Width: 69 mm
Length: 59 mm
Height: 26 mm
Wires length: 178 mm
Fixation holes center to center: 55 mm

Other specifications:
Number of plugs: 1
Number of pins: 5
Number of wires: 5
Minimum Charging Voltage: 14.5V +- 0.5V
Maximum Charging Current: 50A/500W
Open Circuit Voltage: 15V
Operation Temperature: -20° to 85°

Before installing your new voltage regulator rectifier:

  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulatorrectifier.
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors.

Brand new aftermarket voltage regulator rectifier

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • No assembly required
  • Higher grade of electric components.
  • The quality exceeds the OEM equipment
  • All products shipped are tested

We have even included the opposite connector (main harness side) as we know these are often melted corroded defective and a major cause for repetitive electrical issues.

All item pictures are accurate, if in doubt do not hesitate and compare our item to your original part.

Write Your Own Review
You're reviewing:Voltage Regulator for Honda NSR125 NX125 1988-1993 / SYM Jet 50 Euro 125 150 MX 2001-2017 / Kymco Zing 125 1997 1998
Your Rating
Customers Also Viewed
Currently there is no product to display.