Pickup Pulsar Coil for Kawasaki KLF 220 / 250 Bayou 1996-2011 | OEM Repl.# 59026-1135 KLF220 / KLF250
CAD$ 46.00
Availability: Out of stock
SKU
RMS040-104992
- 2011 Kawasaki KLF 250 Bayou
- 2010 Kawasaki KLF 250 Bayou
- 2009 Kawasaki KLF 250 Bayou
- 2008 Kawasaki KLF 250 Bayou
- 2007 Kawasaki KLF 250 Bayou
- 2006 Kawasaki KLF 250 Bayou
- 2005 Kawasaki KLF 250 Bayou
- 2004 Kawasaki KLF 250 Bayou
- 2003 Kawasaki KLF 250 Bayou
- 2002 Kawasaki KLF 220 Bayou
- 2001 Kawasaki KLF 220 Bayou
- 2000 Kawasaki KLF 220 Bayou
- 1999 Kawasaki KLF 220 Bayou
- 1998 Kawasaki KLF 220 Bayou
- 1997 Kawasaki KLF 220 Bayou
- 1996 Kawasaki KLF 220 Bayou
59026-1135
Dimensions:
Height: 25 mm
Length: 46 mm
Width: 20 mm
Bracket center to center: 36 mm
Wires length:
Pick-up to grommet : 30 mm
Grommet to connector : 26 mm
Other specifications:
Number of wires: 2
Number of pins: 2
Wire to wire resistance:
Blue to Black = 0.1 ohms +/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010".
- If no spark or erratic spark, switch the wires at the plug.
Brand new Pick up Coil for Stator 500 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator
- Often unavailable from the OEM manufacturer
- All products shipped are tested
*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Write Your Own Review