Kit Stator + Speed sensor for Can-Am Outlander 400 / 450 / 500 / 570 / 650 | Renegade 570 / 650 / 800 / 850 / 1000 03-17

CAD$ 250.00
Availability: In stock
SKU
RMS900-106953

Please Note There are two possible stators for most of the Outlander models from 2016 through 2019. This stator is only for the standard packages. For all the other packages, please refer to RMS010-106349.

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

106953--R00

Stator's Dimensions:
Interior diameter: 41 mm
Exterior diameter: 104 mm
Thickness: 30 mm Length of wires stator to grommet : 140 mm
Length of wires grommet to plug : 850 mm

Other specifications:
Number of wires: 3
Number of plugs: 1
Number of terminals: 3

Wire to wire resistance:
Alternator: Yellow between each Yellow = 0.4 ohms +/-20%

Speed sensor's Dimensions:
Width: 19 mm
Length: 50 mm
Height: 37 mm
Wires length: 350 mm

Other specifications:
Number of plugs: 1
Number of terminals: 3

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Speed Sensor

Direct replacement to your original unit

Brand new aftermarket Stator + Speed Sensor Kit

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation
  • All product shipped are tested

Brand new aftermarket stator

  • Highest grade of lamination materials
  • Highest grade of copper winding, resistant to 200 degrees Celsius
  • Connector included
  • Rubber grommet included
Write Your Own Review
You're reviewing:Kit Stator + Speed sensor for Can-Am Outlander 400 / 450 / 500 / 570 / 650 | Renegade 570 / 650 / 800 / 850 / 1000 03-17
Your Rating
Customers Also Viewed
Currently there is no product to display.