Stator for Arctic Cat Carb Bearcat 570 F 570 Mountain Cat 1000 570 Thundercat 1000 Z 440 Sno Pro 2000-2014

CAD$ 249.00
Availability: In stock
SKU
RM01301

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

3006-750
3005-636

Wire to wire resistance
Alternator : Yellow to Yellow = 0.8 ohms +/- 20%
Source 1 : Green to Black = 16 ohms +/- 20 %
Source 2 : Green to Brown = 16 ohms +/- 20 %

Dimension
Interior diameter : 38 mm
Exterior diameter : 99 mm
Thickness : 20 mm

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade of lamination materials
  • Highest grade of copper windings, resistant to 200 degrees Celsius
  • The quality exceeds the OEM equipment
  • Connector included
  • All product shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator for Arctic Cat Carb Bearcat 570 F 570 Mountain Cat 1000 570 Thundercat 1000 Z 440 Sno Pro 2000-2014
Your Rating
Customers Also Viewed
Currently there is no product to display.