Stator for Arctic Cat M 9000 | XF 9000 LTD / Cross Country / High Country | ZR 9000 RR | Riot 9000 2017-2024 | 3020-396
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2024 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2024 Arctic Cat Riot 9000
- 2023 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2023 Arctic Cat Riot 9000
- 2022 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2021 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2020 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2020 Arctic Cat XF 9000 CrossTour EFI L/C
- 2019 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2019 Arctic Cat ZR 9000 Sno Pro EFI L/C
- 2019 Arctic Cat ZR 9000 RR EFI L/C
- 2019 Arctic Cat ZR 9000 LTD EFI L/C
- 2019 Arctic Cat XF 9000 High Country EFI L/C
- 2019 Arctic Cat XF 9000 Cross Country EFI L/C
- 2019 Arctic Cat M 9000
- 2018 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2018 Arctic Cat ZR 9000 Sno Pro EFI L/C
- 2018 Arctic Cat ZR 9000 RR EFI L/C
- 2018 Arctic Cat XF 9000 High Country EFI L/C
- 2018 Arctic Cat XF 9000 CrossTrek EFI L/C
- 2018 Arctic Cat XF 9000 CrossTour EFI L/C
- 2018 Arctic Cat XF 9000 Cross Country EFI L/C
- 2018 Arctic Cat M 9000
- 2017 Arctic Cat ZR 9000 Thundercat EFI L/C
- 2017 Arctic Cat ZR 9000 Sno Pro EFI L/C
- 2017 Arctic Cat ZR 9000 RR EFI L/C
- 2017 Arctic Cat ZR 9000 LXR EFI L/C
- 2017 Arctic Cat ZR 9000 LTD EFI L/C
- 2017 Arctic Cat XF 9000 High Country EFI L/C
- 2017 Arctic Cat XF 9000 CrossTrek EFI L/C
- 2017 Arctic Cat XF 9000 Cross Country EFI L/C
- 2017 Arctic Cat M 9000
Dimensions:
Interior diameter: 42 mm
Exterior diameter: 115 mm
Thickness: 23 mm
Length of wires stator to grommet: 190 mm
Length of wires grommet to plug: 910 mm
Length of pickup coil's wire to grommet: 120 mm
Other specifications:
Number of wires: 5
Number of plugs: 2
Number of pins: 5
Number of poles: 18
Wire to wire resistance:
Alternator: White to White = 0.7 ohms +-20%
Pickup: Grey to Black = 512 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.