Stator for Polaris IQ 600R Race 2008-2016 | 600R Race 2017-2018 | OEM Repl.# 4011870
Battery condition is important. No stator can make up for a bad or weak battery. If in doubt, charge your battery and have it load tested, or simply replace it. ALWAYS START WITH A FULLY CHARGED BATTERY !
- 2018 Polaris 600R Race Carb L/C
- 2017 Polaris 600R Race Carb L/C
- 2016 Polaris IQ 600R Race Carb L/C
- 2015 Polaris IQ 600R Race Carb L/C
- 2014 Polaris IQ 600R Race Carb L/C
- 2013 Polaris IQ 600R Race Carb L/C
- 2012 Polaris IQ 600R Race Carb L/C
- 2011 Polaris IQ 600R Race Carb L/C
- 2010 Polaris IQ 600R Race Carb L/C
- 2009 Polaris IQ 600R Race Carb L/C
- 2008 Polaris IQ 600R Race Carb L/C
Dimensions:
Interior diameter: 55 mm
Exterior diameter: 110 mm
Thickness: 35 mm
Length of wires stator to grommet: 60 mm
Length of wires grommet to plug: 280 mm
Length of pickup coil's wire to grommet: 100 mm
Other specifications:
Number of wires: 9
Number of plugs: 2
Number of pins: 9
Number of poles: 12
Wire to wire resistance:
Alternator 1 : Blue to Green = 0.6 ohms +-20%
Alternator 2 : Brown to Yellow = 0.4 ohms +-20%
Pickup: Red to White = 220 ohms +-20%
Before installing your new stator
- Check the AC output of the stator
- Replace any burned or corroded connectors on stator and regulator rectifier
- Check and repair any melted wiring
- Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".
Brand new aftermarket Stator
- Direct replacement to your original unit
- Plug-and-play, direct fit, easy installation
- Highest grade of lamination materials
- Highest grade of copper winding, resistant to 200 degrees Celsius.
- Pick up pulsar coil included
- Connectors included
- Rubber grommet included
- All products shipped are tested
All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.