Stator for Yamaha Venture 500 / V-Max 500 XT XTC / V-Max 600 SX SXS XT XTC XTR / SX 500 R 1997-2001 | 8CR-85510-01-00

CAD$ 309.00
Availability: In stock
SKU
RM01095

In 1999, this stator only fits the VMAX 600 (VX600C). For 1999 VMAX 600 Deluxe (VX600ERC) & VMAX 600 SX (VX600SX), the right stator is RM01132.

Battery condition is extremely important. No stator can work correctly with a bad or weak battery. Always fully charge your battery before performing any charging system tests or replacing parts. If there is any doubt, have the battery load tested or replaced.

8CR-85510-00-00
8CR-85510-01-00
Dimensions :
Interior diameter : 41 mm
Exterior diameter : 103 mm
Thickness : 13 mm
Length of wires stator to grommet : 85 mm
Length of wires grommet to plug : 200 mm
Length of pickup coil's wire to grommet : 100 mm

Other specifications :
Number of wires : 8
Number of plugs : 2
Number of pins : 8

Wire to wire resistance :
Alternator : Yellow/Brown to Yellow = 0.4 ohms +/-20%
Pickup : White/Green to White/Red = 200 ohms +/-20%
Source : Red/Black to Brown = 320 ohms +/-20%
Other : Black to White = 0.3 ohms +/-20% (coil is grounded)

Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burned or corroded connectors on stator and regulator/rectifier
  • Check and repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors

Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.

When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".

Brand new stator

  • Direct replacement to your original unit
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials
  • Highest grade copper windings, resistant to 200 degrees Celsius.
  • Pick up pulsar coil included
  • Connector included
  • Rubber grommet included
  • All product shipped are tested

*All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Write Your Own Review
You're reviewing:Stator for Yamaha Venture 500 / V-Max 500 XT XTC / V-Max 600 SX SXS XT XTC XTR / SX 500 R 1997-2001 | 8CR-85510-01-00
Your Rating
Customers Also Viewed
Currently there is no product to display.