Stator Pickup Pulsar Coil for Honda ATC 250 R TRX 250 R 1985-1989
CAD$ 80.00
Availability: In stock
SKU
RM00128
31120-HA2-004
31120-HA2-671
31120-HB9-741
31120-HA2-671
31120-HB9-741
Wire to wire resistance:
Blue to Green = 115 ohms +/-20%
Blue to Green = 115 ohms +/-20%
Not following these instructions may result in damaging the part or other components on your vehicle.
- By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
- Insulate your solders with heat shrink.
- Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
- Rotate the flywheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010’’.
- If no spark or erratic spark, switch the wires at the plug.
Brand new pick up coil for Stator 115 ohms
- We offer a brand new pickup/pulsar coil for you to repair your stator
- Often unavailable from the OEM manufacturer
- All shipped products are tested
*All item pictures are accurate; if in doubt, do not hesitate to compare our item to your original part.
Write Your Own Review